Ch-technology ST333C..L SERIES Manual de usuario Pagina 5

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 10
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 4
ST333C..L Series
4
www.irf.com
Bulletin I25187 rev. B 04/00
T
J
Max. operating temperature range -40 to 125
T
stg
Max. storage temperature range -40 to 150
R
thJ-hs
Max. thermal resistance, 0.11 DC operation single side cooled
junction to heatsink 0.05 DC operation double side cooled
R
thC-hs
Max. thermal resistance, 0.011 DC operation single side cooled
case to heatsink 0.005 DC operation double side cooled
F Mounting force, ± 10% 9800 N
(1000) (Kg)
wt Approximate weight 250 g
Parameter ST333C..L Units Conditions
K/W
Thermal and Mechanical Specification
°C
K/W
Case style TO - 200AC (B-PUK) See Outline Table
R
thJ-hs
Conduction
(The following table shows the increment of thermal resistence R
thJ-hs
when devices operate at different conduction angles than DC)
Single Side Double Side Single Side Double Side
180° 0.012 0.010 0.008 0.008
120° 0.014 0.015 0.014 0.014
90° 0.018 0.018 0.019 0.019 K/W T
J
= T
J
max.
60° 0.026 0.027 0.027 0.028
30° 0.045 0.046 0.046 0.046
Sinusoidal conduction Rectangular conduction
Conduction angle Units Conditions
Ordering Information Table
5
6
8
9
ST 33 3 C 08 L H K 1
34
10
7
Device Code
12
dv/dt - t
q
combinations available
dv/dt (V/µs) 20 50 100 200 400
10 CN DN EN -- --
12 CM DM EM FM * --
15 CL DL EL FL * HL
18 CP DP EP FP HP
20 CK DK EK FK HK
25 -- -- -- FJ HJ
30 -- -- -- -- HH
t
q
(µs)
1 - Thyristor
2 - Essential part number
3 - 3 = Fast turn off
4 - C = Ceramic Puk
5 - Voltage code: Code x 100 = V
RRM
(See Voltage Rating Table)
6 - L = Puk Case TO-200AC (B-PUK)
7 - Reapplied dv/dt code (for t
q
test condition)
8 -t
q
code
9 - 0 = Eyelet term. (Gate and Aux. Cathode Unsoldered Leads)
1 = Fast-on term. (Gate and Aux. Cathode Unsoldered Leads)
2 = Eyelet term. (Gate and Aux. Cathode Soldered Leads)
3 = Fast-on term. (Gate and Aux. Cathode Soldered Leads)
- Critical dv/dt:
None = 500V/µsec (Standard value)
L = 1000V/µsec (Special selection)
10
*Standard part number.
All other types available only on request.
Vista de pagina 4
1 2 3 4 5 6 7 8 9 10

Comentarios a estos manuales

Sin comentarios